Windows 8

From DEVICES
Revision as of 16:03, 2 September 2013 by Admin (talk | contribs)
Jump to: navigation, search

1. From the Control Panel open the Network and Sharing Center or, from the Settings Search Panel (Winkey+W) search for sharing center

Sharing.png

2. From the list of tasks select Setup a new connection or network. Win8-2.png

3. When asked to choose a new connection option select Manually connect to a wireless network Win8-3.png

4. You will then be asked for information about the wireless network.

In the Network name box , type eduroam (note the lower-case 'e').

From the drop-down lists:
For  Security type  choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)
For  Encryption type  choose AES (or TKIP if your wireless card doesn't support AES)
Select  Next . You should now be told that eduroam has been successfully added. Select  Change connection settings . 

This will bring up the network wireless connection properties.

5. On the Connection tab uncheck Connect to a more preferred network if available. The result should look like:-

6. Select the Security tab.

From the drop-down list for Choose a network authentication method choose Protected EAP (PEAP)

Select Settings…

7. Complete the settings in this dialogue box as shown:

Make sure Validate server certificate is not ticked.

8. The drop-down list under Select Authentication Method should already have Secured password (EAP-MSCHAP v2)selected - select the Configure… button next to it to open the EAP MSCHAPv2 Properties dialogue box:

9. Untick the box next to Automatically use my Windows logon name and password (and domain if any) then select OK, then select OK to close the Protected EAP Properties dialogue box

10. Now, from the Security tab select Advanced settings.

11. Check that you have the 802.1X settings tab and, from the pull-down menu select User authentication then select OK

12. Now Select the 802.11 settings tab. Check that Enable Pairwise Master Key (PMK) caching is not ticked.

13. Select OK to close all the various dialogue boxes

14. Select Close to close the "Manually connect to a wireless network" box.

15. Use Win+C and Settings to find the wireless settings icon. Click on the icon and you should see eduroam listed as a wireless network

16. Check the Connect automatically box next to eduroam and then click on Connect


17. After a short period of time your computer should tell you Checking network requirements and then display a dialogue box prompting for your credentials.

18. Complete the dialogue box using the Network Authentication credentials given to you by the ICT hepdesk

Your User name will be the eduroam identifier shown (typically your name or registration number followed by @institution.ac.ke where institution.ac.ke is your University doman eg ku.ac.ke for Kenyatta University).

Your Password will be the password provided by the ICT helpdesk.

19. Select OK.

All the settings you have made are stored in your computer and should not need re-entering each time you connect.