DEVICES - User contributions [en]

Main Page

2013-09-16T12:18:07Z

Admin:

[[File:Kenetlogo2.jpg]] [[File:Eduroam 450pix.png]]

'''What is eduroam?''' https://www.eduroam.org/

eduroam (education roaming) is the secure, world-wide roaming access service developed for the international research and education community. eduroam allows students, researchers and staff from participating institutions to obtain Internet connectivity across campus and when visiting other participating institutions by simply opening their laptop.

You can download the eduroam poster here for use within your campus [[http://devices.eduroam.ac.ke/mediawiki-1.21.0/images/7/77/Eduroam_poster_v8_.jpg]]

Setting up and connecting to campus wireless via eduroam

=Windows Computers=

[[Windows 8]]

[[Windows 7]]

[[Windows Vista]]

[[Windows XP]]

=Mac OS X=

[[Mac OS X 10.8 - Mountain Lion]]

[[Mac OS X 10.7 - Lion]]

[[Mac OS X 10.6 - Snow Leopard]]

[[Mac OS X 10.5 - Leopard]]

[[Mac OS X 10.4 - Tiger]]

=Other Operating Systems=

[[Ubuntu 12.04]]

=Mobile Devices=

[[iPhone/iPod-Touch (iOS 5)]]

[[iPad (iOS 5)]]

[[Android]]

[[Windows Phone 7]]

=eduroam poster=
You can download the eduroam poster here for use within your campus [[http://devices.eduroam.ac.ke/mediawiki-1.21.0/images/7/77/Eduroam_poster_v8_.jpg]]

[[File:Eduroam poster v8 .jpg]]

Main Page

2013-09-16T12:17:35Z

Admin: /* General Settings */

Main Page

2013-09-16T12:16:08Z

Admin:

File:Eduroam poster v8 .jpg

2013-09-16T12:14:35Z

Admin:

Android

2013-09-10T08:06:45Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

[[File:Wifi settings.png]]

Tap '''Wi-Fi''' to enable Wi-Fi support - the list of networks will become populated

[[File:Populated.png]]

Tap the '''eduroam''' entry in the list

[[File:The list.png]]

Tap to change the EAP type to '''PEAP'''

[[File:Peap.png]]

Tap to set the Sub-type to '''PEAPv0/MSCHAPv2''' (this ought to be the default)

[[File:Default.png]]

Enter your ''username'' followed by ''@realm.ac.ke'' in the User name field (for example username@realm.ac.ke)

[[File:Realm.ac.ke.png]]

On some mobiles you will also see an '''Anonymous identity box'''. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke

Enter your password in the '''Password field'''

[[File:Password.png]]

Hit the '''Connect''' button

[[File:Button.png]]

Wait a little while (up to about a minute) until the message '''"Connected to eduroam"''' appears

[[File:Appears2.png]]

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:Appears2.png

2013-09-10T08:06:22Z

Admin:

Android

2013-09-10T08:05:55Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

[[File:Wifi settings.png]]

Tap '''Wi-Fi''' to enable Wi-Fi support - the list of networks will become populated

[[File:Populated.png]]

Tap the '''eduroam''' entry in the list

[[File:The list.png]]

Tap to change the EAP type to '''PEAP'''

[[File:Peap.png]]

Tap to set the Sub-type to '''PEAPv0/MSCHAPv2''' (this ought to be the default)

[[File:Default.png]]

Enter your ''username'' followed by ''@realm.ac.ke'' in the User name field (for example username@realm.ac.ke)

[[File:Realm.ac.ke.png]]

On some mobiles you will also see an '''Anonymous identity box'''. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke

Enter your password in the '''Password field'''

[[File:Password.png]]

Hit the '''Connect''' button

[[File:Button.png]]

Wait a little while (up to about a minute) until the message '''"Connected to eduroam"''' appears

[[File:Appears.png]]

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:Button.png

2013-09-10T08:04:33Z

Admin:

File:Password.png

2013-09-10T08:04:15Z

Admin:

Android

2013-09-10T08:03:48Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

[[File:Wifi settings.png]]

Tap '''Wi-Fi''' to enable Wi-Fi support - the list of networks will become populated

[[File:Populated.png]]

Tap the '''eduroam''' entry in the list

[[File:The list.png]]

Tap to change the EAP type to '''PEAP'''

[[File:Peap.png]]

Tap to set the Sub-type to '''PEAPv0/MSCHAPv2''' (this ought to be the default)

[[File:Default.png]]

Enter your ''username'' followed by ''@realm.ac.ke'' in the User name field (for example username@realm.ac.ke)

[[File:Realm.ac.ke.png]]

On some mobiles you will also see an '''Anonymous identity box'''. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke

Enter your password in the Password field

[[File:Password.png]]

Hit the Connect button

[[File:Button.png]]

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

Android

2013-09-10T08:00:48Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

[[File:Wifi settings.png]]

Tap '''Wi-Fi''' to enable Wi-Fi support - the list of networks will become populated

[[File:Populated.png]]

Tap the '''eduroam''' entry in the list

[[File:The list.png]]

Tap to change the EAP type to '''PEAP'''

[[File:Peap.png]]

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

[[File:Default.png]]

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

[[File:Realm.ac.ke.png]]

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:Realm.ac.ke.png

2013-09-10T08:00:00Z

Admin:

Android

2013-09-10T07:59:46Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

[[File:Wifi settings.png]]

Tap '''Wi-Fi''' to enable Wi-Fi support - the list of networks will become populated

[[File:Populated.png]]

Tap the '''eduroam''' entry in the list

[[File:The list.png]]

Tap to change the EAP type to '''PEAP'''

[[File:Peap.png]]

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

[[File:Default.png]]

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:Default.png

2013-09-10T07:59:16Z

Admin:

Android

2013-09-10T07:59:06Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

[[File:Wifi settings.png]]

Tap '''Wi-Fi''' to enable Wi-Fi support - the list of networks will become populated

[[File:Populated.png]]

Tap the '''eduroam''' entry in the list

[[File:The list.png]]

Tap to change the EAP type to '''PEAP'''

[[File:Peap.png]]

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:Peap.png

2013-09-10T07:58:32Z

Admin:

Android

2013-09-10T07:58:22Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

[[File:Wifi settings.png]]

Tap '''Wi-Fi''' to enable Wi-Fi support - the list of networks will become populated

[[File:Populated.png]]

Tap the '''eduroam''' entry in the list

[[File:The list.png]]

Tap to change the EAP type to '''PEAP'''

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:The list.png

2013-09-10T07:57:47Z

Admin:

Android

2013-09-10T07:57:10Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

[[File:Wifi settings.png]]

Tap '''Wi-Fi''' to enable Wi-Fi support - the list of networks will become populated

[[File:Populated.png]]

Tap the '''eduroam''' entry in the list

Tap to change the EAP type to '''PEAP'''

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:Populated.png

2013-09-10T07:55:32Z

Admin:

Android

2013-09-10T07:55:07Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

[[File:Wifi settings.png]]

Tap Wi-Fi to enable Wi-Fi support - the list of networks will become populated

Tap the eduroam entry in the list

Tap to change the EAP type to PEAP

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:Wifi settings.png

2013-09-10T07:54:36Z

Admin:

Android

2013-09-10T07:54:25Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

[[File:Wireless controls.png]]

Tap '''Wi-Fi Settings'''

Tap Wi-Fi to enable Wi-Fi support - the list of networks will become populated

Tap the eduroam entry in the list

Tap to change the EAP type to PEAP

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:Wireless controls.png

2013-09-10T07:53:52Z

Admin:

File:Menu2.png

2013-09-10T07:53:28Z

Admin:

Android

2013-09-10T07:53:12Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

Tap '''Wi-Fi Settings'''

Tap Wi-Fi to enable Wi-Fi support - the list of networks will become populated

Tap the eduroam entry in the list

Tap to change the EAP type to PEAP

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

Android

2013-09-10T07:52:29Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the '''All Programs''' menu

[[File:RzLTif.png]

Tap '''Settings''' from the programs menu

[[File:Menu2.png]]

Tap '''Wireless Controls'''

Tap '''Wi-Fi Settings'''

Tap Wi-Fi to enable Wi-Fi support - the list of networks will become populated

Tap the eduroam entry in the list

Tap to change the EAP type to PEAP

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

File:RzLTif.png

2013-09-10T07:50:36Z

Admin:

Android

2013-09-09T13:58:22Z

Admin:

====The following instructions apply to using the Eduroam wireless service on the Android device====

From the home screen, tap the arrow to open the All Programs menu

Tap Settings from the programs menu

Tap Wireless Controls

Tap Wi-Fi Settings

Tap Wi-Fi to enable Wi-Fi support - the list of networks will become populated

Tap the eduroam entry in the list

Tap to change the EAP type to PEAP

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

Android

2013-09-09T13:57:54Z

Admin:

===The following instructions apply to using the Eduroam wireless service on the Android===

From the home screen, tap the arrow to open the All Programs menu

Tap Settings from the programs menu

Tap Wireless Controls

Tap Wi-Fi Settings

Tap Wi-Fi to enable Wi-Fi support - the list of networks will become populated

Tap the eduroam entry in the list

Tap to change the EAP type to PEAP

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

Android

2013-09-09T13:57:30Z

Admin: Created page with "Connecting to eduroam via Android The following instructions apply to using the Eduroam wireless service on the Android. From the home screen, tap the arrow to open the All P..."

Connecting to eduroam via Android
The following instructions apply to using the Eduroam wireless service on the Android.

From the home screen, tap the arrow to open the All Programs menu

Tap Settings from the programs menu

Tap Wireless Controls

Tap Wi-Fi Settings

Tap Wi-Fi to enable Wi-Fi support - the list of networks will become populated

Tap the eduroam entry in the list

Tap to change the EAP type to PEAP

Tap to set the Sub-type to PEAPv0/MSCHAPv2 (this ought to be the default)

Enter your username followed by @realm.ac.ke in the User name field (for example username@realm.ac.ke)

On some mobiles you will also see an Anonymous identity box. Add in your Remote Access account username again followed by @real.ac.ke e.g. username@realm.ac.ke
Enter your password in the Password field

Hit the Connect button

Wait a little while (up to about a minute) until the message "Connected to eduroam" appears

A connection to eduroam will automatically be made in future if Wi-Fi is switched on and you are within range.

Windows Vista

2013-09-09T13:55:57Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to '''Start'''', then '''Control Panel''', then '''Network and Internet''', then '''Network and Sharing Centre'''

2. From the list on the left choose '''Manage Wireless Networks'''

3. Select '''Add'''

[[File:Add.png]]

4. Select '''Manually create a network profile'''

[[File:Network profile.png]]

5. In the '''information box'''

[[File:Information box.png]]

In the '''Network name''' box, type ''eduroam'' (note the lower-case 'e')

•From the drop-down lists

•from '''Security type''' choose '''WPA2-Enterprise''' (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from '''Encryption type''' choose '''AES''' (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting - '''Save this network for me only''' - is selected.

Select '''Next'''

6.Select '''Change connections settings''' then, on the '''Connection tab''' ''uncheck'' '''Connect to a more preferred network if available'''

7.Select the '''Security''' tab

[[File:Security tab.png]]

•from the drop-down list for Choose a network authentication method choose '''Protected EAP (PEAP)'''

• Select '''Settings'''...

8. Complete the settings in this dialogue box as shown:

[[File:8.png]]

ensure the '''Validate server''' certificate box is '''unchecked'''.

9.The drop-down list under '''Select Authentication Method''' should already have Secured password (EAP-MSCHAP v2) selected - select the '''Configure'''... button next to it to open the EAP MSCHAPv2 Properties dialogue box:

[[File:Dialogue box.png]]

10. '''Untick''' the box next to Automatically use my Windows logon name and password (and domain if any) then select '''OK'''

11. Select '''OK''' to close all the different dialogue boxes

12. Select '''Close''' to close the "Manually connect to a wireless network" box

13. After a short period of time, your computer should detect the eduroam wireless network and display a balloon, asking if you want to enter your details to connect to it:

[[File:13.png]]

14. Click in the balloon and a dialogue box will appear, prompting you for your credentials

[[File:14.png]]

15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

Windows Vista

2013-09-09T13:51:56Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[File:Information box.png]]

In the '''Network name''' box, type ''eduroam'' (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting - '''Save this network for me only''' - is selected.

Select '''Next'''

6.Select Change connections settings then, on the Connection tab uncheck Connect to a more preferred network if available

7.Select the Securitytab

[[File:Security tab.png]]

•from the drop-down list for Choose a network authentication method choose Protected EAP (PEAP)

• Select Settings...

8. Complete the settings in this dialogue box as shown:

[[File:8.png]]

ensure the Validate server certificate box is unchecked.

9.The drop-down list under Select Authentication Method should already have Secured password (EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2 Properties dialogue box:

[[File:Dialogue box.png]]

10. Untick the box next to Automatically use my Windows logon name and password (and domain if any) then select OK

11. Select OK to close all the different dialogue boxes

12. Select Close to close the "Manually connect to a wireless network" box

13. After a short period of time, your computer should detect the eduroam wireless network and display a balloon, asking if you want to enter your details to connect to it:

[[File:13.png]]

14. Click in the balloon and a dialogue box will appear, prompting you for your credentials

[[File:14.png]]

15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

Windows Vista

2013-09-09T13:51:07Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[File:Information box.png]]

In the '''Network name''' box, type ''eduroam'' (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting - '''Save this network for me only''' - is selected.

Select Next

6.Select Change connections settings then, on the Connection tab uncheck Connect to a more preferred network if available

7.Select the Securitytab

[[File:Security tab.png]]

•from the drop-down list for Choose a network authentication method choose Protected EAP (PEAP)

• Select Settings...

8. Complete the settings in this dialogue box as shown:

[[File:8.png]]

ensure the Validate server certificate box is unchecked.

9.The drop-down list under Select Authentication Method should already have Secured password (EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2 Properties dialogue box:

[[File:Dialogue box.png]]

10. Untick the box next to Automatically use my Windows logon name and password (and domain if any) then select OK

11. Select OK to close all the different dialogue boxes

12. Select Close to close the "Manually connect to a wireless network" box

13. After a short period of time, your computer should detect the eduroam wireless network and display a balloon, asking if you want to enter your details to connect to it:

[[File:13.png]]

14. Click in the balloon and a dialogue box will appear, prompting you for your credentials

[[File:14.png]]

15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

File:14.png

2013-09-09T13:50:35Z

Admin:

Windows Vista

2013-09-09T13:50:06Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[File:Information box.png]]

In the '''Network name''' box, type ''eduroam'' (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting - '''Save this network for me only''' - is selected.

Select Next

6.Select Change connections settings then, on the Connection tab uncheck Connect to a more preferred network if available

7.Select the Securitytab

[[File:Security tab.png]]

•from the drop-down list for Choose a network authentication method choose Protected EAP (PEAP)

• Select Settings...

8. Complete the settings in this dialogue box as shown:

[[File:8.png]]

ensure the Validate server certificate box is unchecked.

9.The drop-down list under Select Authentication Method should already have Secured password (EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2 Properties dialogue box:

[[File:Dialogue box.png]]

10. Untick the box next to Automatically use my Windows logon name and password (and domain if any) then select OK

11. Select OK to close all the different dialogue boxes

12. Select Close to close the "Manually connect to a wireless network" box

13. After a short period of time, your computer should detect the eduroam wireless network and display a balloon, asking if you want to enter your details to connect to it:

[[File:13.png]]

14. Click in the balloon and a dialogue box will appear, prompting you for your credentials

15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

File:13.png

2013-09-09T13:49:36Z

Admin:

Windows Vista

2013-09-09T13:49:13Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[File:Information box.png]]

In the '''Network name''' box, type ''eduroam'' (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting - '''Save this network for me only''' - is selected.

Select Next

6.Select Change connections settings then, on the Connection tab uncheck Connect to a more preferred network if available

7.Select the Securitytab

[[File:Security tab.png]]

•from the drop-down list for Choose a network authentication method choose Protected EAP (PEAP)

• Select Settings...

8. Complete the settings in this dialogue box as shown:

[[File:8.png]]

ensure the Validate server certificate box is unchecked.

9.The drop-down list under Select Authentication Method should already have Secured password (EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2 Properties dialogue box:

[[File:Dialogue box.png]]

10. Untick the box next to Automatically use my Windows logon name and password (and domain if any) then select OK

11. Select OK to close all the different dialogue boxes

12. Select Close to close the "Manually connect to a wireless network" box

13. After a short period of time, your computer should detect the eduroam wireless network and display a balloon, asking if you want to enter your details to connect to it:

14. Click in the balloon and a dialogue box will appear, prompting you for your credentials

15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

Windows Vista

2013-09-09T13:48:23Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[File:Information box.png]]

In the '''Network name''' box, type ''eduroam'' (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting - '''Save this network for me only''' - is selected.

Select Next

6.Select Change connections settings then, on the Connection tab uncheck Connect to a more preferred network if available

7.Select the Securitytab

[[File:Security tab.png]]

•from the drop-down list for Choose a network authentication method choose Protected EAP (PEAP)

• Select Settings...

8. Complete the settings in this dialogue box as shown:

[[File:8.png]]

ensure the Validate server certificate box is unchecked.

9.The drop-down list under Select Authentication Method should already have Secured password (EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2 Properties dialogue box:

[[File:Dialogue box.png]]

10. Untick the box next to Automatically use my Windows logon name and password (and
domain if any) then select OK
11. Select OK to close all the different dialogue boxes
12. Select Close to close the "Manually connect to a wireless network" box
13. After a short period of time, your computer should detect the eduroam wireless network and display
a balloon, asking if you want to enter your details to connect to it:
14. Click in the balloon and a dialogue box will appear, prompting you for your credentials
15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

File:8.png

2013-09-09T13:46:54Z

Admin:

Windows Vista

2013-09-09T13:45:56Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[File:Information box.png]]

In the '''Network name''' box, type ''eduroam'' (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting - '''Save this network for me only''' - is selected.

Select Next

6.Select Change connections settings then, on the Connection tab uncheck Connect to a more preferred network if available

7.Select the Securitytab

[[File:Security tab.png]]

•from the drop-down list for Choose a network authentication method choose Protected EAP (PEAP)

• Select Settings...

8. Complete the settings in this dialogue box as shown:

[[File:Dialogue box.png]]

ensure the Validate server certificate box is unchecked.

9.The drop-down list under Select Authentication Method should already have Secured password (EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2
Properties dialogue box:10. Untick the box next to Automatically use my Windows logon name and password (and
domain if any) then select OK
11. Select OK to close all the different dialogue boxes
12. Select Close to close the "Manually connect to a wireless network" box
13. After a short period of time, your computer should detect the eduroam wireless network and display
a balloon, asking if you want to enter your details to connect to it:
14. Click in the balloon and a dialogue box will appear, prompting you for your credentials
15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

File:Dialogue box.png

2013-09-09T13:45:00Z

Admin:

Windows Vista

2013-09-09T13:44:18Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[File:Information box.png]]

In the '''Network name''' box, type ''eduroam'' (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting - '''Save this network for me only''' - is selected.

Select Next

6.Select Change connections settings then, on the Connection tab uncheck Connect to a more preferred network if available

7.Select the Securitytab

[[File:Security tab.png]]

•from the drop-down list for Choose a network authentication method choose Protected EAP (PEAP)

• Select Settings...

8. Complete the settings in this dialogue box as shown:
ensure the Validate server certificate box is unchecked.
9.
The drop-down list under Select Authentication Method should already have Secured password
(EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2
Properties dialogue box:10. Untick the box next to Automatically use my Windows logon name and password (and
domain if any) then select OK
11. Select OK to close all the different dialogue boxes
12. Select Close to close the "Manually connect to a wireless network" box
13. After a short period of time, your computer should detect the eduroam wireless network and display
a balloon, asking if you want to enter your details to connect to it:
14. Click in the balloon and a dialogue box will appear, prompting you for your credentials
15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

File:Security tab.png

2013-09-09T13:43:58Z

Admin:

Windows Vista

2013-09-09T13:43:13Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[File:Information box.png]]

In the '''Network name''' box, type ''eduroam'' (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting - '''Save this network for me only''' - is selected.

Select Next

6.Select Change connections settings then, on the Connection tab uncheck Connect to a more preferred network if available

7.Select the Securitytab

[[

•from the drop-down list for Choose a network authentication method choose Protected EAP (PEAP)

• Select Settings...

8. Complete the settings in this dialogue box as shown:
ensure the Validate server certificate box is unchecked.
9.
The drop-down list under Select Authentication Method should already have Secured password
(EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2
Properties dialogue box:10. Untick the box next to Automatically use my Windows logon name and password (and
domain if any) then select OK
11. Select OK to close all the different dialogue boxes
12. Select Close to close the "Manually connect to a wireless network" box
13. After a short period of time, your computer should detect the eduroam wireless network and display
a balloon, asking if you want to enter your details to connect to it:
14. Click in the balloon and a dialogue box will appear, prompting you for your credentials
15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

Windows Vista

2013-09-09T13:39:57Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[File:Information box.png]]

In the Network name box, type eduroam (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting -
Save
this network for me only - is selected.
Select Next
6.
Select Change connections settings then, on the Connection tab uncheck Connect to a more
preferred network if available
7.
Select the Securitytab•
from the drop-down list for Choose a network authentication method choose Protected EAP
(PEAP)
• Select Settings...
8. Complete the settings in this dialogue box as shown:
ensure the Validate server certificate box is unchecked.
9.
The drop-down list under Select Authentication Method should already have Secured password
(EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2
Properties dialogue box:10. Untick the box next to Automatically use my Windows logon name and password (and
domain if any) then select OK
11. Select OK to close all the different dialogue boxes
12. Select Close to close the "Manually connect to a wireless network" box
13. After a short period of time, your computer should detect the eduroam wireless network and display
a balloon, asking if you want to enter your details to connect to it:
14. Click in the balloon and a dialogue box will appear, prompting you for your credentials
15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

File:Information box.png

2013-09-09T13:39:08Z

Admin:

Windows Vista

2013-09-09T13:38:51Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

[[

In the Network name box, type eduroam (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting -
Save
this network for me only - is selected.
Select Next
6.
Select Change connections settings then, on the Connection tab uncheck Connect to a more
preferred network if available
7.
Select the Securitytab•
from the drop-down list for Choose a network authentication method choose Protected EAP
(PEAP)
• Select Settings...
8. Complete the settings in this dialogue box as shown:
ensure the Validate server certificate box is unchecked.
9.
The drop-down list under Select Authentication Method should already have Secured password
(EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2
Properties dialogue box:10. Untick the box next to Automatically use my Windows logon name and password (and
domain if any) then select OK
11. Select OK to close all the different dialogue boxes
12. Select Close to close the "Manually connect to a wireless network" box
13. After a short period of time, your computer should detect the eduroam wireless network and display
a balloon, asking if you want to enter your details to connect to it:
14. Click in the balloon and a dialogue box will appear, prompting you for your credentials
15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

Windows Vista

2013-09-09T13:38:20Z

Admin:

=== Configure eduroam – Windows Vista ===

1. Go to Start, then Control Panel, then Network and Internet, then Network and Sharing Centre

2. From the list on the left choose Manage Wireless Networks

3. Select Add

[[File:Add.png]]

4. Select Manually create a network profile

[[File:Network profile.png]]

5. In the information box

In the Network name box, type eduroam (note the lower-case 'e')

•From the drop-down lists

•from Security type choose WPA2-Enterprise (or WPA-Enterprise if your wireless card doesn't support WPA2)

•from Encryption type choose AES (or TKIP if your wireless card doesn't support AES)

•If the computer has been set up for multiple users then make sure that the additional setting -
Save
this network for me only - is selected.
Select Next
6.
Select Change connections settings then, on the Connection tab uncheck Connect to a more
preferred network if available
7.
Select the Securitytab•
from the drop-down list for Choose a network authentication method choose Protected EAP
(PEAP)
• Select Settings...
8. Complete the settings in this dialogue box as shown:
ensure the Validate server certificate box is unchecked.
9.
The drop-down list under Select Authentication Method should already have Secured password
(EAP-MSCHAP v2) selected - select the Configure... button next to it to open the EAP MSCHAPv2
Properties dialogue box:10. Untick the box next to Automatically use my Windows logon name and password (and
domain if any) then select OK
11. Select OK to close all the different dialogue boxes
12. Select Close to close the "Manually connect to a wireless network" box
13. After a short period of time, your computer should detect the eduroam wireless network and display
a balloon, asking if you want to enter your details to connect to it:
14. Click in the balloon and a dialogue box will appear, prompting you for your credentials
15. Complete the dialogue box using the Username and Password provided by the ICT Helpdesk

File:Network profile.png

2013-09-09T13:37:47Z

Admin: